The MF Boost is an Expression enhanced, twin topology boost pedal that allows you to select between an articulate VCA signal path and a colored OTA signal path. This completely unique boost design works with your guitar and amplifier to conjure boutique sound and responsiveness from any guitar/amplifier combination. Its natural compression and sound enhancement also bring out the best tone and performance in other effects pedals. When paired with an expression pedal, the MF Boost can be used as a tone enhancing volume pedal or sweep able-gain boost pedal. The expression pedal input also provides access to higher gain values not available on the panel. CONTROLS GAIN- Sets the input gain from off to maximum. With the Boost switch in the down position (VCA mode), this knob should be set to maximum. In this setting you will notice tighter bottom, focused midrange, and more open top end. With Boost in the up position (clipped OTA mode), the sound is creamy and lightly compressed with a slightly more forward midrange. BOOST - In the down position, signal is sent through theca signal path providing clean, articulate tonal enhancement with a subtle 6dBboost (12dB+ w/ expression). This setting feels and sounds like a boutique am pin a pedal. With the switch in the up position, signal is sent through the clipped OTA path providing 12dB of boost (18dB+ w/ expression). This path has creamy, classic tone that bonds guitar and amplifier for everything from subtle bite and drive to singing leads. Both settings have a naturally occurring musical compression. TONE- At higher settings this control adds openness, note articulation and picking detail. In this setting the top-end in your amplifiers sweetened while remaining smooth, the mids become focused, and the bottom end appears more robust and tight. At lower settings the Tone control can be used to fatten up an amp or tame harsh top-end.
True analog signal pathTrue bypassBroad gain boost (adjustable)Tone controlRugged build quality