D.Effects Iceberg and Traveller High End Boutique Sound from China

This site, tone and quality construction should cost 3 or 4 times more.!Truly handmade with the best electronics componentsThe Iceberg is a well rounded Overdrive Electric Guitar Effects Pedal which will give you natural and rich overtones. The pedal also boasts a 3 clip Mode giving you the versatility needed for any application which may be needed. From mind blowing solos, overdrive, gritty rhythm, and even to boosted clean tones, the Iceberg has you covered whether in a live performance or studio recording. The Iceberg also features True Bypass circuitry. It is a roadworthy companion due to its sturdy and durable full aluminum casing. Controls:- Clip Toggle Switch, Output, Tone, Drive Bypass:- True Bypass Power Requirement:- 9v DC Centre Negative (Not Included)..

Truly handmade with the best electronics componentsThis site, tone and quality construction should cost 3 or 4 times more.!The DE02 Traveller is a Distortion Pedal which will take you back through time with the vintage tones you are able to emulate from it. From Vintage 60's warm tube distortion sound to modern NU metal speaker cracking tones. It features 3 tone modes with the flick of the toggle switch. Switch from a compact and tight sound to a strong distortion presence. With the versatility for a guitarist's tone needs, this is a must-have for any rock player.Bypass:- True Bypass Power Requirement:- 9v DC Centre Negative (Not Included)..

AMT Bricks F-CLEAN Names used in this document are trademarks of their respective owners, which are in no way are associated or affiliated with AMT Electronics. These trademarks of other manufacturers were used to identify products whose sounds were reviewed in the making of this product. Features: – Small dimensions (Snickers size). – The full set of regulation knobs (Gain, Treble, Middle, Bass, Volume), despite the compact design. – The really high anode voltage (+250…300V). – The implementation of either full tube or hybrid (tube + semiconductors) circuit design with efficient emulation of vacuum triode cascades by semiconductor components. – Ability to use overloaded channels in preamp mode (connected to the Amp’s Return) or in the drive pedal mode (connected to the amp’s Input). – The pedal can control other devices or be controlled by other devices. It has special CTRL A and CTRL B connectors. – X-Lead/X-Clean preamps can be used as separate devices, as well as a group of preamps connected in a serial chain (both via the audio path and the control connectors CTRL A and CTRL B). In the latter case, turning on any preamp in the chain will turn off all other connected preamps, that is, they’ll be switched to TRUE BYPASS mode. Thus, without the use of any external devices, it is possible to implement a multichannel preamp from almost any reasonable number of preamps of the X-Lead/X-Clean line, switched by the “one of” rule. – In addition, X-Lead / X-Clean preamps, along with other devices, can be used as part of an AMT Bricks pedalboard. Full information about the pedalboard will be presented later. COMPATIBLE TUBES At the discretion of the manufacturer, a preamplifier can be equipped with a tube of one of the following types: AMT-12АХ7WS, 12АХ7, ECC83 (or another 12AX7 compatible)...