Order CA$180+ (before taxes) and get FREE Shipping(valid in US and Canada)

- Get 20% OFF your 1st Order ...Use coupon: ONLYPEDALS20

Questions? WE ARE HERE TO HELP: Contact Us or FAQ

AMT Electronics Reincarnator RD-2 Direct Box

  • C$199.99

It is a DI-box and a ReAmp-box in one device. Both functions can be used in Passive or Active modes. In the passive mode – you can use the device without a power supply. AMT RD-2 lets you record a “dry” sound of your guitar and use it later for reamping

Add to Wish List

Compare this Product

Ask a Question

АМТ Reincarnator RD-2 (DI-box + ReAmp-box)

AMT Electronics presets a new device – AMT RD-2 “Reincarnator”.

Some words about Reamping technology:

Many sound recording studios use Reamping for getting desired sounding.

The essence of reamping technology is a playback of pre-recorded “dry” guitar signal (the signal from the pickups) through a guitar amp and recording simultaneously with the microphone the guitar cabinet sound.

With this technique, you can once record a guitar track and then, an unlimited number of times to playback and record it. In this case you can try to use different amplifiers, audio processing devices and microphone positions. Even with a live recording of a guitar cabinet with a microphone, you can later find out that you are not quite satisfied with the result, namely, satisfied with the quality of performance, but not satisfied with the quality of the guitar signal processing. When recording “live sounding” guitar cabinet, you can at the same time record a “dry” guitar sound, then, afterwards, using reamping you can achieve the desired result.

The main DI-box function is basically the matching of a high guitar pickups’ impedance and a relatively low input impedance of the recording device. In addition, a DI-box makes a transformation of an unbalanced guitar signal into a balanced mic-level signal for sending to the input of the DAW (sound card). Guitar pickups have sufficiently high impedance, something like 10-15kOhm, so if the signal is put directly to the low-impedance input of the DAW (sound card), there will be a significant change in the signal. In addition, unbalanced guitar cables are susceptible to cross talk and at a great length; it is desirable to move from an unbalanced line to a symmetric (balanced) one.

The main Reamp-box functions are the transformation of a symmetric (balanced) line-level signal from the output of the DAW (sound card) into the unbalanced signal being sent to the guitar amp input and a matching of the DAW (sound card) low output impedance and high-impedance guitar amplifier input.

1. Weight net 400 g
2. Dimensions (Case only) W 84mm H 42mm L94mm
3. Power Requirement (active mode): 15mA, 9…18VDC  (not included)

Power Source power supply 9-18 Volt DC (not included)
Current Draw 15 mA
Height 42 mm
Depth 84 mm
Width 94 mm

Recent Questions

Ask a question about this product

only pedals has amt electronics reincarnator rd-2 direct box and re-amp box 9


There are no reviews for this product.

Write a review

Note: HTML is not translated!