AMT Electronics FS-2 MIDI Footswitch

With  FS-2MIDI  you  can  combine  devices  with  standard  footswitch-controlled
connectors  and  almost  all  modern  devices  having  MIDI-interface  into  a  single
complex in which the required presets or channels switching for all devices will be
carried out by a push of a button.
FS-2MIDI allows:
- channels switching of external devices having corresponding control connector by
means of a foot switch or MIDI-control commands.
- managing parameters of external devices with a MIDI-interface, depending on the
current state of the device.

FS-2MIDI Features:

• Operating MIDI-devices via one of the 16 MIDI-channels (user adjustable);
  
• User-defined MIDI-command type: Control Change (CC) or Program Change
  (PC);
• CC or PC command adjustment for each device state from 0 to 127;
• 3 operational modes; 
• Informative display;
    All parameters and adjustments as well as the device state are kept in the
  nonvolatile  memory  of  the  device  and  are  immediately  restored  when  the device is switched on;
• Additional connector for switching some of the AMT Electronics-made pedals,
  allowing to use the device as a MIDI-converter;
• Compact and lightweight

FS-2MIDI is designed for the purpose similar to the long-running FS-2, but the new device allows switching channels not only by foot switches but also with help of wide-spread MIDI interface. FS-2MIDI lets you incorporate devices with standard control plugs and virtually any modern MIDI devices into an integrated set where one can switch between all the devices’ presets or channels with just one button.

The display of FS-2MIDI shows all user’s actions and MIDI settings in a simple way. Device operation is easy and intuitive. All the settings are stored in nonvolatile memory. They are restored instantly when you turn the power on.

The front panel of FS-2MIDI has left and right foot switch buttons with indicators and display.

Specifications

• MIDI IN - MIDI input to receive commands from external devices;
• MIDI OUT – MIDI output;
• CONTROL INPUT – channel status input for AMT pedals which have corresponding output;
• FSW 1&2 OUTPUT – channel switching for devices having control jacks (connection via 3-way cable with 1/4" stereo jacks);
• IN DC 9-12V – socket for connecting power adapter (9...12VDC 0.12A)